Most of the people purchase robot lawnmower to make their lives easier. One of the critical concerns after purchasing the robot lawn mower is related to its installation procedure.
It is a matter of discussion for the people that can it be installed easily or not. It is just a big responsibility that requires proper care.
Gratefully, one thing we can assure is that the installation process isn’t much critical. It doesn’t require a set of expertise or proper technical knowledge to install the robot lawnmower.
Most of the mowers are so simple and can be installed in a couple of hours. The panorama that you won’t be struggling for cutting your grass is an additional motivation to install these mowers.
Before discussing the installation process in detail, it is imperative to consider two main points that will help in saving a lot of frustration.
Make Sure Robot Lawn Mower is Suitable for the Garden
Every lawn mower is different from the other one. All of them their various limitations. You need to choose the best device for your lawn after thorough research. Their characteristics are different in terms of the size of the lawn they can cut and gradients of the slope that can be managed by them.
We strongly recommend you read carefully about the model you want to purchase to confirm that it is best to fit for the garden. You can read the buyer guide for Robot Lawn Mower on our website.
Carefully Read the Manual
Trust us, the installation procedure is not so tricky, but it can cause you a severe headache if you do not take the instructions seriously.
You cannot install the robot lawnmower with the divert mindset. We have a terrible habit that whenever we purchase new technology, we read the manual after getting stuck into some trouble.
Please, try not to wait for the mistakes so that can learn from them. Must understand the manual to avoid the difficulty in the future.
We thought about sharing these two points as they were so important to share before we proceed further. Now we will come towards the process of installation and how it can be done without causing a headache.
Be Cautious while Placing the Charging Station
The first and the foremost thing that you have to do is to make a sketch of your garden in your mind or visit it personally.
The purpose of this activity is to find out the most suitable location for the charging station. It must be in the range of power sources.
An external power socket is another secure option, but not everyone has a power socket with him. Another option is that weatherproof extension cable can be run from a power source available in the garage.
But this solution is not suitable and doesn’t work in the long run. To avoid all the complexity, the installation of the external power source is the best solution.
If you follow this route, you may think about some other purposes of external power including Christmas light, tools required for the garden and the external light.
The external power source can be used for multiple purposes, and these purposes can influence you to install the external power source.
Soon after the placement of the external power source, it will become easier to install the charging station for the robot lawnmower.
The charging station must be located in a place where the robot lawnmower docks with the station without involving any complexity.
To attain this purpose, most of the manufacturers’ advice to place it on the flatter lawn. We strongly recommend you to leave a 2-meter straight section of the lawn on either side of the charging station.
The purpose is to make it sure that there is no difficulty for the robot lawnmower to navigate back to the charging station.
You must place the charging station on the grass, and it should be placed on the paved area as it is too risky. There are multiple reasons to put the charging station on the grass.
- The charging station gets screwed to the ground with the help of plastic screws. That’s why its not favorable to use them on the paved area.
- Secondly, the perimeter wire needs to be attached to the ground in the loops. So, there are chances of tripping if it will be placed on the paved floor. Tripping is hazardous for life.
Once you have chosen the most suitable place for the charging station, you can place it in that selected area along with the supplied screws.
These screws will be anchored into the grass. After this step, power cable can be linked with the power socket and the charging station.
After completing this procedure, we strongly recommend you to attach the robot lawnmower to the docking station.
It will benefit you as you install the boundary wire and it will be charged till that time.
There is a pro tip to remember that doesn’t place the charging station in the area that can be seen from the yard. It doesn’t give a good impression and ruins the entire look of the garden.
The Boundary Wires
There are several options to deal with boundary wires. It they can be attached to the ground or can be buried under lawn. The approximate depth should be between 5 to 10 cm. It comes with its pros and cons.
- The core advantage of attaching the wire with the ground is that it is one of the quickest options to go for, and it allows wires to adjust speedily. As adjustment in the initial days takes time. Pegging the wires with the grass is also preferable as the grass will be grown in a few months and the wires will not be visible after that.
- Unveiling the negative side of pegging the wire with the ground is that it will restrict the height.
- Restricting the height can cause blade catching and difficulty in cutting the grass.
Burying the wires is desirable. It will surely take some time to perform the function smoothly, but it involves less risk and makes the robot lawnmower move quickly. Moreover, the maintenance of the lawn can be done soon with the help of it.
A pro tip regarding burying the perimeter wire is that do it after the completion of rain period.
The reason is that it will make the ground softer and grass can be cut easily for the creation of a proper channel for the perimeter wire.
Deal with the Trees and Obstacles
If you have placed Iceland in the middle of your lawn. You must mark it with the boundary wire. There should be a continuous loop of the boundary wire so that perimeter wires can be laid easily.
Along with the boundary wire, there should be another wire known as a guidewire. It must be placed in the garden so that robot lawn mower can trace the area and rush towards the charging station in case of low battery.
Although there is much more that you need to know about the installation process of the best robot lawnmower.
But these are the initial and most uncomplicated guidelines that can be understood and implemented without any trouble.
Try not to ignore any of it as it for your benefit, and ignoring them could be hazardous for health.